Workshops and Meetings at Tavanir and Iran Transfo Corp. Subsidiaries

On 29 September — 2 October 2018, Izolyator plant held workshops and business meetings at the energy company Tavanir of the Ministry of Energy of Iran and subsidiaries of Iran Transfo Corp. transformer plant.

Alexander Znamenskiy, Manager of International Business Development Department and Victor Kiryukhin, Lead Technical Support Specialist represented Izolyator.

Representatives of the Iranian Fanavaran Pooya Sanat Vafa, supplier of industrial equipment, also participated in all meetings of the agenda.

Business Meeting and Workshop in Tavanir

On 2 October 2018, Izolyator plant had a business meeting and workshop “Modern technologies in production of high-voltage bushings” in energy company Tavanir.

Logo The main objectives of establishing Iran’s Power Generation, Transmission & Distribution Management Company (Tavanir) are to faster the supervisory activities of the government in the field of operation and development of the Electric Power Industry of the country within the scope of policies issued by the Ministry of Energy, Leading the subsidiary companies of the Electric Power Industries toward increasing their efficiency and productivity and favorable utilization of the Electric Power Industry’s facilities and should it necessitates get involve in certain execution activities as well as carrying out the responsibilities of supervision and preparation of programs in behalf of the Ministry of Energy of Iran. The company is headquartered in Tehran.

Before opening the seminar, Tavanir’s General Manager had a brief meeting with the representatives of the organizer companies Izolyator and Fanavaran Pooya Sanat Vafa. At the meeting, he spoke about the long-term relations and visible results of cooperation between the power engineers of Russia and Iran and wished further strengthening and development of business ties between the two countries.

The workshop became the result of earlier discussions and arrangements to familiarize management representatives, engineers and process engineers of Tavanir with advanced technologies in design and manufacture of high-voltage insulating equipment.

Representatives of both Tavanir head office in Teheran and management and specialists of regional divisions took part in the workshop, making a total of 45 attendees.

A dialogue during the workshop at Tavanir: Alexander Znamenskiy and Head of Bureau at Tavanir Dr.Hashem Alipour, General Manager of Technical & Transmission Administration Bureau)

A dialogue during the workshop at Tavanir: Alexander Znamenskiy and Head of Bureau at Tavanir Dr.Hashem Alipour, General Manager of Technical & Transmission Administration Bureau)

The structure of the workshop:

  • The first part: introductions of seminar participants, summary of indicators of the Unified energy system of Russia, range of geographic and climate conditions of high-voltage bushings park operation, technical upgrade program at the Federal Grid Company of the Unified Energy system of Russia, Izolyator plant and its products;
  • The second part: high-voltage bushing design, modern trends in designing and production, life cycle, comparative analysis of bushings with solid internal RIP insulation as compared to their counterparts with different designs, transporting and storage, installation on power equipment, specifics of operation and diagnostics;
  • The third part: discussion and questions from the audience.

Alexander Znamenskiy is familiarizing the audience of the seminar with the power industry of Russia and Izolyator achievements

Alexander Znamenskiy is familiarizing the audience of the seminar with the power industry of Russia and Izolyator achievements

Victor Kiryukhin is explaining about main elements of a RIP HV bushing

Victor Kiryukhin is explaining about main elements of a RIP HV bushing

Presently, 95 % of all high-voltage bushings, operating on power facilities in Iran, are oil-in-paper (OIP) bushings. They have no resource left in operating life, required regular control and raise concerns with the service divisions of the power grid operators.

Izolyator representatives gave exhaustive replies to all the questions, connected with replacement of OIP bushings with their modern RIP-insulated analogues.

Open discussion during Izolyator plant’s seminar at Tavanir

Open discussion during Izolyator plant’s seminar at Tavanir

The workshop enjoyed a high level of interest and went on a high professional level.

Participants of Izolyator workshop at Tavanir

Participants of Izolyator workshop at Tavanir

Tavanir representatives expressed gratitude for all participants of the workshop of suggested to have such events in other cities of Iran.

Business meetings and workshop of Iran Transfo Corp. Divsions

As agreed during the visit of Iran Transfo Corp. representatives to Izolyator plant in July 2018, our colleagues paid a visit and had talks with management of the following divisions of the corporation:

  • Maintenance company for warranty and post warranty service of transformers Iran Transfo After Sales Services Co. (P.J.S.),
  • Sales department,
  • Engineering company Ghoods Niroo.

Logo Iran Transfo Corp. backed by half of century experience in transformer industry, as a leading manufacturer in the Middle East are always looking to improve the quality and variety of products to keep pace with today's technology. Products include a wide range of small distribution transformers to large power transformers, special transformers to suit the industrial requirements, transformer equipment and a full range of substations. Presently, Iran Transfo Corp.’s production capacity is 23000 MVA per annum. Iran Transfo Corp. exports its products to the neighboring countries Syria, Iraq, Pakistan. The production facilities of this 10 000 people corporation are in Zanzhan. The company is headquartered in Teheran.

Besides, Izolyator ran a seminar for the technical specialists of Iran Transfo Corp.

Izolyator representatives during their visit to the divisions of Iran Transfo Corp.

Izolyator representatives during their visit to the divisions of Iran Transfo Corp.

Iran Transfo After Sales Services Co. (P.J.S.)

The sides discussed planned activities on technical maintenance of transformers in connection with expiry of their service life at power facilities of Iran.

Izolyator representatives on the territory of Iran Transfo After Sales Services Co. (P.J.S.)

Izolyator representatives on the territory of Iran Transfo After Sales Services Co. (P.J.S.)

Following the topics of the talks, we introduced the advantages of HV bushings with solid internal RIP insulation and their diagnostics in operation to the Iranian partners. We also studied possibilities of replacement of operating bushings by their modern analogues, made by Izolyator.

Dialogue with Iran Transfo After Sales Services Co. (P.J.S.)
Management

Dialogue with Iran Transfo After Sales Services Co. (P.J.S.) Management

Izolyator representatives made their acquaintance with Iran Transfo After Sales Services Co. (P.J.S.) manufacturing facilities.

Getting familiar with Iran Transfo After Sales Services Co. (P.J.S.) manufacturing facilities

Getting familiar with Iran Transfo After Sales Services Co. (P.J.S.) manufacturing facilities

Sales Department of Iran Transfo Corp.

At the meeting with the management of the sales service of Iran Transfo Corp., Izolyator discussed ways to increase efficiency of interaction between the two companies, taking into account the factors that regulate Russia-Iran trade relations.

Participants of the meeting of representatives of sales department of Iran Transfo Corp. and Izolyator plant

Participants of the meeting of representatives of sales department of Iran Transfo Corp. and Izolyator plant

Izolyator representatives shared their rich experience of trade all over the world, including Middle Eastern countries.

Workshop for technical specialists of Iran Transfo Corp.

According to preliminary arrangement about a workshop of Izolyator plant for technical specialists of Iran Transfo Corp. Several topics were covered at the event:

  • Advantages of high-voltage bushings with RIP insulation compared to other types of internal insulation,
  • Analogues with other types of insulation,
  • Technical feasibility of using RIP bushings on power facilities,
  • Experience of foreign countries and Russian Federation in operation of RIP bushings, made by Izolyator,
  • Comparative analysis of porcelain and silicone external insulation,
  • Transportations, storage, installation and maintenance of high-voltage bushings,
  • Izolyator plant’s capabilities in design and manufacture of modern analogues of bushings with obsolete construction designs, operating on transformer substations in Iran.

Seminar of Izolyator for the technical specialists of Iran Transfo Corp.

Seminar of Izolyator for the technical specialists of Iran Transfo Corp.

The seminar went in the atmosphere of a live and open dialogue, where the sides shared professional knowledge, experience and views of implementation of modern electrical insulating equipment.

Izolyator representatives at the workshop at Iran Transfo Corp.

Izolyator representatives at the workshop at Iran Transfo Corp.

Audience of Izolyator’s workshop at Iran Transfo Corp.

Audience of Izolyator’s workshop at Iran Transfo Corp.

By a common opinion of the workshop participants, this form of cooperation should be developed as one the most efficient ones.

Ghoods Niroo Engineering Company

The engineering company Ghoods Niroo develops complex technical solutions for the power networks of Iran.

At the meeting, the audience considered the advantages of Izolyator in terms of establishing a long-term cooperation.

Our colleagues made a detailed presentation of innovative and production potential of Izolyator plant, advanced manufacturing technologies of a wide range of high-voltage bushings for Russian and overseas customers.

Participants of the meetings of Ghoods Niroo and Izolyator representatives

Participants of the meetings of Ghoods Niroo and Izolyator representatives

The focus was given to the comparative analysis of HV RIP bushings with bushings with other types of internal insulation.

The successful results of the talks and technical seminars proved a high level of mutual interest and outlined the most promising areas of cooperation between Iranian companies and Izolyator plant.

We appreciate Tavanir and Iran Transfo Corp. for their invitation and organization of all the events and visits on a high level.